Print this Product

Pure Activated Mineral Water Filter SEM System

The Most Advanced Activated Mineral Water Filter System

As you will see from the detail information below, this is one of the most comprehensive filter systems available. We are very exited to be able to support people with Pure Vortex Activated Mineral Water flowing through there whole home. The system comes with the Patented ER Alloy® media, which lasts a full 2 years before it needs replacing.

All BPA free, NSF and FDA approved system.

Five Key Reasons To Buy A Water Treatment System:

  • Filtering
  • Softening
  • Ionising
  • Alkalising
  • Super Hydrating (micro-clustering)

The Pure Water Filter SEM System provides all these functions in one system that is eco-friendly and cost effective.

Advanced Multi-stage Mineral Water Purification and Activation system

In stage 1, Water flows through one - micron filter pads (1 micron equals 1/25,000th of an inch), which remove suspended particles such as silt, sediment, cyst (Giardia, Cryptosporidium), sand, rust, dirt, and other un-dissolved matter.

In stage 2, (Activated Carbon Filter) Water flows through coconut shell granulated activated carbon (GAC). GAC is universally recognized and widely used as an effective adsorbent for a wide variety of organic contaminants, such as chlorine (99.9%), chemicals linked to cancer (THM's, benzene) pesticides, herbicides, insecticides, volatile organic compounds (VOC's),  PCB's, MTBE's and hundreds of other chemical contaminants that may be present in water that create bad taste and odours.

Carbon is extremely porous and provides a large surface area for contaminants to collect. Carbon-only filters must also use their capacity for chlorine removal, resulting in a shortened life. They also may use a bituminous coal carbon, which is good at removing chlorine, but not as effective at removing chemicals. We use a high-grade coconut shell carbon that is most effective at removing chemicals. Coconut shell carbon provides a significantly higher volume of micropores than either coal-, wood or lignite-based carbon. As a result, it is more effective than other carbon types in removing trihalomethanes (THM's) and other chemicals from municipally supplied water. Since our REDOX media removes the chlorine before it reaches the carbon, the carbon capacity is not wasted on chlorine and is free to concentrate more effectively on organic contaminants.

In stage 3, Water flows through the ion exchange resin, reducing heavy metals such as lead, copper, aluminium, and water hardness. (Natural Water Softener)

In stages 4 and 5, Water flows through a bed of media made of a special high-purity alloy blend of two dissimilar metals - copper and zinc.

ER Alloy® is a major advancement in water treatment technology that works on the electro-chemical and spontaneous-oxidation-reduction (REDOX) principles. Chlorine is instantaneously and almost inexhaustibly oxidized.

Tests on the Alloy/GAC cartridge have shown 99+% chlorine removal past 20,000 gallons of water. (In comparison, carbon cartridges of comparable volumes drop below 90% effectiveness after only 4,000 gallons.)

Iron and hydrogen sulphide are oxidized into insoluble matter and attach to the surface of the media. Heavy metals such as lead, mercury, copper, nickel, chromium, cadmium, aluminium, and other dissolved metals are removed from the water by the electrochemical process. They are attracted to the surface of the media, much like a magnet. The media inhibits bacterial growth throughout the entire unit in fact, it has been shown to be reduced up to 90%, eliminating the need for silver, which is commonly used in carbon-only filters (silver is considered a pesticide by the EPA and, as such, must be registered with them).

Is copper or zinc added to the water in any significant amount? On 2.3ppm chlorinated water, <0.05mg/l copper and only 0.46mg/l zinc were measured. The EPA aesthetic levels are 1.0 mg/l for copper and 5.0mg/l for zinc. Both zinc and copper are essential minerals for good health - the FDA recommends a daily intake of 15 mg of zinc and 2 mg of copper.

In stage 6, Water flows through another one-micron filtration pad for further reduction of undesirable particles. The end result is a great reduction or the total elimination  of a wide variety of contaminants. ER Alloy® is a patented product and a major advancement in water treatment technology that works on the basic process known as REDOX (oxidation/reduction) principles, representing a new and unique way of water processing medium which by its natural process of electrochemical oxidation/reduction and adsorption action reduces and/or removes many unwanted contaminants from water.

ER Alloy® medium is a versatile, specially formulated high purity, bimetal material. This product operates as a multifunctional medium, which has superior capabilities of de-chlorination of drinking water and reduces dissolved heavy metals in water supplies. ER alloys are Antimicrobials. (An antimicrobial is a substance that kills or inhibits the growth of microorganisms such as bacteria, fungi, algae and mould or protozoans). ER65 and 95 alloys antimicrobial properties never deteriorate or deplete.

Patented ER Alloy® media consists of a high purity copper-zinc formulation. These substances exchange electrons or bond with chlorine and other metals contained in the water to create harmless substances. ER Alloy® is completely safe and meets EPA and FDA standards for levels of zinc and copper in potable water, so the process is not toxic and does not cause any adverse side effects.

Once the water passes through the filter system it is then activated by the SEM triple vortex and ceramic mineral activator. The triple helix within the SEM Triple Vortex Water Conditioner creates a powerful vortex action in the water. The water then flows through a bed of patented mineral ceramic beads which further activate and micro-cluster the water. This ceramic and vortex action treats the water without the use of any chemicals. It activates the water in a number of way and provides an alternative for reducing lime scale in water pipes. This amazing product can provide a solution for people who are suffering from the effects of poor quality water, especially in developing countries. Red rust (Iron Oxide) in water pipes is a major problem in millions of homes and buildings worldwide. The SEM helps to reduce corrosion in a cost effective way. The SEM system adds to and massively enhances the effect of the vortex on the water.

When water passes through the triple vortex chamber, the speed of water is accelerated creating a high-speed vortex. Due to the vortex action, centrifugal and centripetal forces change the structure of the water. As a result the water is micro-clustered increasing the antibacterial and sterilising power of the water. The ceramic beads emit far infrared rays which further activate and restructure the water. The combination of these two activating forces massively improve the therapeutic effects of the water and reduce maintenance and other costs.

Naturally softened, Activated Alive Mineral Water has so many advantages over chemically treated water.

  • You can drink it – No toxic chemicals in the water
  • Natural Ph Balance is restored
  • Elimination of E.Coli bacteria
  • Elimination of Coliform bacteria
  • Removal of nitrates
  • Removal of chlorine and Chloramine
  • Removal of hormones and pharmaceuticals
  • Increased absorption ability for improved hydration
  • Better skin and hair
  • It is much healthier for your body
  • It tastes wonderful
  • Dramatic reduction in mineral, lime scale and rust
  • It helps to maintain the health of your domestic appliances
  • Healthier for your plants, garden and lawn.
  • Lower on-going costs
  • No Salt
  • Eco-friendly - good for your, your family and your planet
  • Enjoy your Pure Water Filter SEM System.

 

 

What is ER Alloy®?

ER Alloy® is a high-purity copper-zinc formulation that uses a basic process known as redox (oxidation/reduction) to remove chlorine, lead, mercury, iron, and hydrogen sulphide from water supplies.

How does ER Alloy® Work?
In short, the ER Alloy® redox process works by exchanging electrons with contaminants. This "give and take" of electrons converts many contaminants into harmless components. During this reaction, electrons are transferred between molecules, and new elements are created. Some harmful contaminants are changed into harmless components. Others are electrochemically bound to the ER Alloy® media.

What Contaminants Does ER Alloy® Remove?
ER Alloy® process media works to reduce or remove chlorine, iron, hydrogen sulphide, lead, mercury, calcium carbonate, magnesium, chromium, bacteria, algae, and fungi. Redox media removes up to 98% of water-soluble cations (positively-charged ions) of lead, mercury, copper, nickel, chromium, and other dissolved metals. In most cases, more than 98% of chlorine is removed if operated within recommended flow rates.

Will ER Alloy® remove Iron from the Water?
Redox media alloys function as catalysts to change soluble ferrous cations (positively-charged ions) into insoluble ferric hydroxide, which can be removed with regular backwashing. With enough oxygen dissolved in the water, iron removal rates of 98% or better are common.

How Does ER Alloy® Remove Chlorine from the Water?
High-purity copper-zinc redox media consistently remove 99% of free chlorine by electrochemically reducing dissolved chlorine gas to water-soluble chloride ions.

How does ER Alloy® Remove Hydrogen Sulphide from the Water?
When hydrogen sulphide contaminated water enters the ER Alloy® filter, the copper in the ER Alloy® media loses an electron and the sulphur gains an electron and copper sulphide and water are formed. The copper sulphide is insoluble in water and can be backwashed off the ER Alloy® filter media

Will the ER Alloy® process media remove heavy metals such as lead from the water?
ER Alloy® media remove up to 98% of water-soluble cations (positively-charged ions) of lead, mercury, copper, nickel, chromium, and other dissolved metals. When filtered through ER Alloy® media, soluble lead cations are reduced to insoluble lead atoms, which are electroplated onto the surface of the media. Other heavy metals bond to the media and may be recovered when the exhausted media pass through a copper smelter.

Will the ER Alloy® process media control microorganism growth in the water filters?
ER Alloy® media are Antimicrobials. The media inhibits bacteria growth (fungi, algae and mould) and reduces lime scale, mould, and fungi. throughout the entire unit. The oxidation/reduction potential (ORP) shift by a factor of -300mV or more for water filtered through redox media controls microorganism growth. Treating water reduces bacteria and other microorganisms by disrupting electron transport, causing cellular damage.

ER Alloy® process media also kill bacteria by direct electrochemical contact and by the flash formation of hydroxyl radicals and hydrogen peroxide, both of which interfere with a microorganism's ability to function..

Will the ER Alloy® filter systems add any toxic substances to the water?
ER Alloy® process media are completely safe. ER Alloy® media meet EPA and Food and Drug Administration standards for levels of zinc and copper in potable water, so the process is not toxic and does not cause any adverse side effects. You may not even realize that ER Alloy® process media are working for you. ER Alloy® media is the core product of many filtration systems, and can be used in conjunction with other products to provide superior purification.

Quantity

Price: £2,297.00

Loading Updating cart...
LoadingUpdating...

Permanent link to this article: http://mineralwaterfilter.co.uk/products-page/commercial-water-systems/pure-water-filter-sem-system/